m/a-com division of amp incorporated n north america: tel. (800) 366-2266, fax (800) 618-8883 n asia/pacific: tel. +85 2 2111 8088, fax +85 2 2111 8087 n europe: tel. +44 (1344) 869 595, fax +44 (1344) 300 020 www.macom.com amp and connecting at a higher level are trademarks. specifications subject to change without notice. v3.00 1307066 patent pending note: unless otherwise specified, all dimensions are mm/in. solderless cable termination 3mm mated height excellent cable retention usable with flexible and semi-rigid micro-coaxial cables tape and reel packaging m/a-com? revolutionary smt|quickgrip product line is designed to meet the growing demand for a reliable, low cost system for direct termi- nation of coax to a printed circuit board (pcb). smt|quickgrip tech- nology eliminates the requirement to connectorize the coaxial cable, reducing assembly times and, therefore, cost. the smt|quickgrip surface mount device occupies less pcb area than conventional through hole coaxial connectors. an innovative microstrip mounting pattern and cable receptacle design ensures excellent grounding and pcb retention. the smt|quickgrip cable termination system stands a mere 3mm off the board when mated, allowing for closer pitch/spacing when designing a system. the smt|quickgrip provides optimal cable retention for applications where shock, vibration, and/or cable flexure may be encountered. this unique rf design accepts both flexible and semi-rigid micro-coaxial cables while delivering exceptional rf perfor- mance up to 3ghz. these features make this system extremely versatile for design engi- neers and offer a reliable, cost effective alternative to direct soldering of cable to the pcb. the cable is inserted into the device by means of a simple self-aligning hand tool, eliminating the requirement for skilled per- sonnel. this system removes the possibility of damaged pcbs and cables which are common quality issues associated with direct solder, while providing superior rf performance. the smt|quickgrip accom- modates multiple cable insertions allowing easy replacement of cables for repairs. this receptacle is designed for high volume assembly using surface mount technology and is available in tape and reel packaging for pick and place board assembly. pre-stripped cables and inter-series cable pigtails are available as turnkey solutions for your application needs (i.e.: for use in multi-board applications, for connecting antennas to the pcb, or point to point transmission on the same pcb). the smt|quickgrip cable termination system is ideal for wireless surface mount applications in handsets, pagers and personal digital assistants (pda). the smt|quickgrip mechanical and electrical performance, coupled with its ease of use, ensure it to be a high quality, reliable solution for current and future interconnect needs. m/a-com is an iso9001 certified manufacturer and maintains an spc controlled manufacturing environment. please call your local sales or distribution office for additional information and qualification samples today. cable conductor cable dielectric cable braid cable jacket pwb pwb 3.2 ref .120 6.4 ref .250 3.0 ref .120 2.1 ref .083 3.0 ref .120 1.3 1.26 1.22 1.18 1.14 1.1 0.3 0.6 0.9 1.2 1.8 2.1 2.4 2.7 3 frequency (ghz) vswr typical vswr using smt|quickgrip with omni-flex 200 cable
m/a-com division of amp incorporated n north america: tel. (800) 366-2266, fax (800) 618-8883 n asia/pacific: tel. +85 2 2111 8088, fax +85 2 2111 8087 n europe: tel. +44 (1344) 869 595, fax +44 (1344) 300 020 www.macom.com amp and connecting at a higher level are trademarks. specifications subject to change without notice. v3.00 specifications requirement detail general materials finishes electrical mechanical housing: polyphenylene sulfide contacts: copper alloy contacts: gold plate over nickel frequency range: dc - 3ghz impedance: usable with 50 & 75 ohm systems insertion loss: .08 ?hz dwv: 750 vrms vswr: 1.3:1@ 3ghz (omni-flex 100, 200 and .047 semi-rigid) 1.4:1 @ 3ghz (.034 semi-rigid) connector durability: 5 mating cycles min. (receptacle only) tape and reel packaging: 16mm per eia-481 force to disengage by cam-out (grams): omni-flex 100 - 469 typical omni-flex 200 - 543 typical .034 semi-rigid - 852 typical .047 semi-rigid - 1066 typical temperature rating: -40?(-40?) to 105?(221?) when mated with pvc cable -40?(-40?) to 125?(257?) when mated with teflon cable resistance to solder heat: infrared, convection, and vapor phase solderable (receptacle only). maximum reflow time/temperature not to exceed 260? for 3 minutes. omni-flex 100 (osmt) materials: pvc flexible cable (105?) jacket: polyvinyl chloride shield: silver plated copper wire, 38 awg, 90% min. coverage dielectric: pfa or fep center conductor: silver plated copper clad steel, 30 awg minimum bend radius: 9.5mm (.375 inch) insertion loss (pvc and fep cable only): 0.4 db/ft., 1.3db/m @ 500 mhz 0.6 db/ft., 2.0db/m @ 1 ghz 0.9 db/ft., 3.0db/m @ 2 ghz center conductor resistance: .26 ohms per foot average omni-flex 200 (ssmt) fep flexible cable (200?) fluorinated ethylene propylene silver plated copper wire, 44 awg, 90% min. coverage ptfe (polytetrafluoroethylene) silver plated copper clad steel, 30 awg 6.35mm (.250 inch) 0.4 db/ft., 1.3db/m @ 500 mhz 0.5 db/ft., 2.0db/m @ 1 ghz 0.9 db/ft., 3.0db/m @ 2 ghz .26 ohms per foot average environmental cable information
cable insertion tool 2598-5438-54 m/a-com division of amp incorporated n north america: tel. (800) 366-2266, fax (800) 618-8883 n asia/pacific: tel. +85 2 2111 8088, fax +85 2 2111 8087 n europe: tel. +44 (1344) 869 595, fax +44 (1344) 300 020 www.macom.com amp and connecting at a higher level are trademarks. specifications subject to change without notice. v3.00 part number description 2318-0000-54 bulk packaged 100/bag 2399-5011-54 700 piece reel 2399-5012-54 2000 piece reel product offering 1. printed wiring board material: glass epoxy fr-4 or similar, relative permitivity: 4.8, 1 oz. copper clad both sides. 2. these dimensions valid for 1.6 (.062) board thickness. recommended mounting pattern for microstrip line pick and place feature
ground
contact center contact 0.5 .020 3.2 .125 6.4 .250 center contact terminal 3.0 .120 3.4 .135 1.3 .050 1.3 .050 0.6 .025 circuit line ground pad 2 plcs 2
plcs 1 oz area free of solder mask ? 0.5 via .020 5 plcs .0014 copper 4.3 .169 2.4 .096 1.3 .050 7.8 .305 0.6 .024 2.4 .095 9.0 .354 3.4 .133 1.5 .058 0.5 .020 1.3 .050 2.5 .100 3.8 .150 note: unless otherwise specified, all dimensions are mm/in. 1. place cable outer conductor on ground terminal with cable dielectric touching shoulder of block. 2. place tool into guide slots of terminal block making sure cable figure on tool is facing in right direction and tool is square to block. 3. with tool push cable into ground terminal and contact terminal at the same time. assembly procedure
v3.00 omni-flex 100 (osmt cable) omni-flex 200 (ssmt cable) connector type 9970-4xxx-01 9980-4xxx-01 sma straight plug 9970-4xxx-02 9980-4xxx-02 sma bulkhead jack 9970-4xxx-03 9980-4xxx-03 smb straight plug 9970-4xxx-04 9980-4xxx-04 smb bulkhead jack 9970-4xxx-05 9980-4xxx-05 smb right angle jack 9970-4xxx-06 9980-4xxx-06 osx straight plug 9970-4xxx-07 9980-4xxx-07 osx bulkhead jack 9970-4xxx-08 9980-4xxx-08 osx right angle plug 9970-4xxx-09 9980-4xxx-09 50 ohm coaxial contact receptacle (#8) inter-series cable assemblies cable assemblies 1. to order, replace xxx in part number with cable length in millimeters (ie: 9970-4100-05 would be an inter-series pigtail with an smb right angle jack 100mm long). cables should be ordered in 5mm increments. 2. cable length tolerances: length ??mm (in) tolerance mm (in) 50 to 100mm (3.94) ? ( .12) 101 to 500mm (3.98 to 19.69) ? ( .20) over 500 (19.69) ?0 ( .39) note: unless otherwise specified, all dimensions are mm/in. m/a-com division of amp incorporated n north america: tel. (800) 366-2266, fax (800) 618-8883 n asia/pacific: tel. +85 2 2111 8088, fax +85 2 2111 8087 n europe: tel. +44 (1344) 869 595, fax +44 (1344) 300 020 www.macom.com amp and connecting at a higher level are trademarks. specifications subject to change without notice.
m/a-com division of amp incorporated n north america: tel. (800) 366-2266, fax (800) 618-8883 n asia/pacific: tel. +85 2 2111 8088, fax +85 2 2111 8087 n europe: tel. +44 (1344) 869 595, fax +44 (1344) 300 020 www.macom.com amp and connecting at a higher level are trademarks. specifications subject to change without notice. v3.00 pre-stripped cables 1. to order, replace xxx in part number with cable length in millimeters (ie: 9970-4100-05 would be an inter-series pigtail with an smb right angle jack 100mm long). cables should be ordered in 5mm increments. 2. cable length tolerances: length ??mm (in) tolerance mm (in) 50 to 100mm (3.94) ? ( .12) 101 to 500mm (3.98 to 19.69) ? ( .20) over 500 (19.69) ?0 ( .39) omni-flex 100 (osmt cable) omni-flex 200 (ssmt cable) description 9970-1xxx-23 9980-1xxx-23 pre-stripped omni-flex cables for use with smt|quickgrip .034 semi-rigid .047 semi-rigid description 9921-1xxx-23 9922-1xxx-23 pre-stripped semi-rigid cables for use with smt|quickgrip cable assemblies note: unless otherwise specified, all dimensions are mm/in.
m/a-com division of amp incorporated n north america: tel. (800) 366-2266, fax (800) 618-8883 n asia/pacific: tel. +85 2 2111 8088, fax +85 2 2111 8087 n europe: tel. +44 (1344) 869 595, fax +44 (1344) 300 020 www.macom.com amp and connecting at a higher level are trademarks. specifications subject to change without notice. v3.00 bulk packed or packaged in plastic carrier tape on a reel available on 700 piece or 2000 piece plastic reel sealed plastic carrier tape in accordance with eia-481-1 conductive anti-static tape material to prevent static charge entry to electronic assembly or equipment recommended max. storage temperature of plastic carrier tape: 40? (140?), 50% relative humidity max. packaging figure 1 smt|quickgrip surface mount plug receptacle figure 2 typical pneumatic nozzle the smt|quickgrip surface mount plug receptacle is compatible with industry standard automatic placement equipment utilizing pneumatic (vacuum) part pick- up. smt|quickgrip plug surface mount receptacles have been approved for use with fuji pick and place equipment. pneumatic nozzles with diameters ranging from 0.76mm - 1.07mm may be used for internal pick-up. vacuum nozzle configuration may vary depending on equipment utilized. typical configuration follows: automatic placement nozzle vacuum should be 15-30 inches hg. component placement pressure should not exceed 400g. embossed carrier tape ref cover tape ref ( max thk) center contact terminal ref 2318-0000-54 7.7 .304 ref 0.4 .016 max 7.5 .295 1.8 .069 2.0 .079 ref 4.0 .157 ref 3.3 .131 ref 16.0 .630 ref 8.0 .315 ref 1.5 .059 ? 0.3 .012 pick & place area for 0.76-1.07mm dia x 50.8mm lg nozzle 1.5 .060 ref 1.4 .054 ref smt quickgrip internal pickup 1.0 .040 ? 2.0 .080 ref ref application notes note: unless otherwise specified, all dimensions are mm/in.
m/a-com division of amp incorporated n north america: tel. (800) 366-2266, fax (800) 618-8883 n asia/pacific: tel. +85 2 2111 8088, fax +85 2 2111 8087 n europe: tel. +44 (1344) 869 595, fax +44 (1344) 300 020 www.macom.com amp and connecting at a higher level are trademarks. specifications subject to change without notice. v3.00 smt|quickgrip plug receptacles are designed for reflow soldering processes. flow (wave) soldering is not appropriate for this device. the type of solder paste selected for reflow soldering is generally a function of many factors relative to the overall system pcb design. most applications will use common electronic grade solders such as: 63/37, 60/40 or 62/36/2 with mild rosin/resin fluxes. metal content of the paste for screen and/or stencil applications is generally 85-90% by weight, slightly lower for nozzle dispensing applications. when screening or stenciling, soldering paste thickness of .15mm (.006 inch) to .25mm (.010) is recommended. soldering figure 3 typical infrared and convection heating/soldering profile figure 4 typical vapor phase heating/soldering profile smt|quickgrip plug receptacles can withstand most electronics grade cleaning agents including: high temperature water/aqueous cleaners, ethanol, methanol, mek, acetone, 1,1,1-tricloroethane, trichlordethylene, perchloroehtylene, chloroflorocarbon (cfc) solvents, isopropanol, dichlorofluoroethane, and blends. the omni-flex cables can also withstand mild exposure to the above listed cleaning agents. post-solder cleaning temp c 250 200 150 100 50 solder paste cure 30-60 sec 50-100 c ambient or forced cool down reflow 20 - 40 sec at 235 c typ. 240 - 250 c max preheat flux melt/activation solder sphere melt begins 60 - 90 sec at 100 - 200 c temp c 250 200 150 100 50 10 - 30 min at 80 - 130 c preheat 30 - 180 sec at 110 - 150 c ambient or forced cool down reflow 20 - 90 sec at 215 c application notes note: unless otherwise specified, all dimensions are mm/in.
m/a-com division of amp incorporated n north america: tel. (800) 366-2266, fax (800) 618-8883 n asia/pacific: tel. +85 2 2111 8088, fax +85 2 2111 8087 n europe: tel. +44 (1344) 869 595, fax +44 (1344) 300 020 www.macom.com amp and connecting at a higher level are trademarks. specifications subject to change without notice. v3.00 americas argentina ?buenos aires phone: + 54-1-733-2000 fax: + 54-1-717-0988 brazil ?sao paulo phone: + 55-11-861-1311 fax: + 55-11-861-0397 canada ?toronto phone: + 1-905-475-6222 fax: + 1-905-474-5520 europe/middle east/africa austria ?vienna inside: phone: + 0222-277-97-0 fax: + 0222-270-26-61 outside: phone: + 43-1-277-97-0 fax: + 43-1-270-26-61 belgium ?brussels phone: + 32-2-719-2511 fax: + 32-2-725-4928 bulgaria ?sofia phone: + 359-2-971-2152 fax: + 395-2-971-2153 croatia ?zagreb phone: + 385-1-67-04-46 fax: + 385-1-69-16-04 czech republic ?kurim phone: + 420-5-41-162-111 fax: + 420-5-41-162-223 denmark ?viby phone: + 45-86-295-055 fax: + 45-86-295-133 egypt ?cairo phone: + 202-417-76-47 fax: + 202-419-23-34 estonia ?tallinn phone: + 372-6205-800 fax: + 372-6205-804 finland ?helsinki phone: + 358-9-512-3420 fax: + 358-9-512-34250 france ?pontoise phone: + 33-1-34-20-88-88 fax: + 33-1-34-20-86-00 germany ?langen phone: + 49-6103-709-0 fax: + 49-6103-709-223 related businesses m/a-com division americas lowell, ma, usa phone: + 1- 978-442-5000 fax: + 1-978-442-5354 europe/middle east/africa bracknell, england phone: + 44-1344-869-595 fax: + 44-1344-300-020 asia/pacific hong kong phone: + 85-2-2111-8088 fax: + 85-2-2111-8087 amp business centers, worldwide chile ?santiago phone: + 56-2-236-4267 fax: + 56-2-235-0061 columbia ?bogata phone: + 57-1-369-0045 fax: + 57-1-269-7525 mexico ?mexico city phone: + 52-5-398-76-11 fax: + 52-5-398-79-64 united states ?harrisburg, pa phone: + 1-717-564-0100 fax: + 1-717-986-7575 for latin/south american countries not shown phone: +54-1-733-2015 fax: +54-1-733-2083 great britain ?london phone: + 44-181-954-2356 fax: + 44-181-954-6234 greece ?athens phone: + 30-1-902-5515 fax: + 30-1-902-4237 holland ??-hertogenbosch phone: + 31-73-624-6246 fax: + 31-73-621-2365 hungary ?budapest phone: + 36-1-344-2633 fax: + 36-1-344-2634 ireland ?dublin phone: + 353-1-820-3000 fax: + 353-1-820-9790 israel ?tel aviv phone: + 972-3-645-07-07 fax: + 972-3-649-24-13 italy ?torino phone: + 39-11-4012-111 fax: + 39-11-4031-116 lithuania ?vilnius phone: + 370-2-231402 fax: + 370-2-231403 norway ?oslo phone: + 47-66-77-88-50 fax: + 47-66-77-88-55 poland ?warsaw phone: + 48-22-672-47-90/91/92 fax: + 48-22-672-47-88 portugal ?lisbon phone: + 351-1-387-70-16 fax: + 351-1-387-71-72 romania ?bucharest phone: + 40-1-311-3479/3596 fax: + 40-1-312-0574 russia moscow phone: + 7-095-926-5506/07/08/09 fax: + 7-095-926-5505 st. petersburg phone: + 7-812-325-3083 fax: + 7-812-326-3288 slovakia ?bystrica phone: + 421-88-761-120/121 fax: + 421-88-761-122 slovenia ?ljubljana phone: + 386-61-161-3270 fax: + 386-61-161-3240 south africa ?johannesburg phone: + 27-11-805-65-35 fax: + 27-11-805-65-40 spain ?barcelona phone: + 34-3-291-0330 fax: + 34-3-201-7879 sweden ?stockholm phone: + 46-8-580-833-00 fax: + 46-8-580-194-70 switzerland ?steinach phone: + 41-71-447-0447 fax: + 41-71-447-0444 turkey ?istanbul phone: + 90-212-281-8181 fax: + 90-212-281-8184 for middle east/african countries not shown phone: +33-1-34-20-83-83 fax: +33-1-34-20-86-09 asia/pacific australia ?sidney phone: + 61-2-9840-8200 fax: + 61-2-9899-5649 india ?bangalore phone: + 91-80-845-3014 fax: + 91-80-845-3038 indonesia ?jakarta phone: + 6221-526-7852 fax: + 6221-526-7856 japan ?tokyo phone: + 81-44-844-8111 fax: + 81-44-812-3207 korea ?seoul phone: + 82-3274-0535 fax: + 82-3274-0524 malaysia ?kuala lampur phone: + 603-705-3055 fax: + 603-705-3066 new zealand ?auckland phone: + 64-9-634-4580 fax: 64-9-634-4586 peoples republic of china hong kong phone: + 852-2-35-1628 fax: + 852-2-35-0243 shangha phone: + 86-21-6485-0602 fax: + 86-21-6485-0728 shunde phone: + 86-765-7751368 fax: + 86-765-7752823 philippines ?manila phone: + 632-811-0437 fax: + 632-811-0441 singapore ?singapore phone: + 65-482-0311 fax: + 65-482-1012 taiwan ?taipei phone: + 886-2-704-4815 fax: + 886-2-704-4940 thailand ?bangkok phone: + 91-662-513-9888 fax: + 91-662-513-9889 vietnam ?ho chi minh city phone: + 84-8823-2546 fax: + 84-8823-1443 www.amp.com www.macom.com
|
